Addressing increased bandwidth due to new standards, Blustream has announced two new USB3 devices to enable AV integrators to distribute and switch USB-C data signals with ease.

The first solution being introduced is the UEX3C-KIT, a USB extender kit utilising HDBaseT technology to extend USB 3.2 Gen1 signals up to 100m over a single CAT cable.

It allows up to two USB devices to be connected to a single USB host with support for a transmission data bandwidth up to 5Gbps.

The UEX3C-KIT is backward compatible with USB 2.0 and 1.1 devices and provides bi-directional Power over Cable (PoC).

The SW12USB is the second device to be unveiled. It is a USB 3.2 Gen2 10Gb switcher, supporting four USB devices that can be switched to two USB-C host connections.

It also supports auto switching between host devices using signal sense, or manually controlled via the front-panel push buttons, Web-GUI, TCP/IP.

For More information: www.blustream.co.uk

The post New USB3 Distribution Solutions From Blustream! appeared first on Smart Home World Magazine.

Blustream, a leading innovator in AV distribution, is set to showcase its cutting-edge range of video distribution solutions at CEDIA Expo 2023, taking place in Denver. The company will be stationed at booth 3612, where they will introduce their latest offering, the Dante-enabled IP350UHD video over IP system. This system is capable of transmitting up to 4K UHD content at 60Hz, supporting HDMI 2.0 18Gbps with a 4:4:4 ratio over a 1Gb network. Additionally, Blustream will present a wide range of matrix solutions, catering to various project requirements, including the 8×8 HMX88-18G HDBaseT matrix switcher, which boasts uncompressed 4K UHD resolution at 60Hz and 4:4:4 clarity.

Jason Fitzgerald, Product Manager at Blustream, expressed enthusiasm about the event, stating, “We are looking forward to showcasing our full line at the CEDIA and Commercial Integrator Expos in Denver. We’ll highlight solutions addressing both residential and commercial applications, and give dealers the opportunity to learn more at our training session on Friday, Sept. 8, at 11 a.m. in room 709.”

At the expo, Blustream will present its extensive family of video over IP solutions, spanning from the 1080p Contractor series to the IP500UHD-TZ, designed for SDVoE over a 10Gb managed network transceiver. Notably, the Dante-enabled IP350UHD transmitters and receivers will be featured, enabling the transmission of 4K UHD content at 60Hz with 4:4:4 HDMI 2.0 and HDR support at 18Gbps over a 1Gb network. The flexibility of Blustream’s video over IP solution, offering multiple configuration options, makes it an ideal choice for various installation types. Leveraging lossless compression technology, this solution delivers HDMI, IR, RS-232, and USB/KVM signals over distances of up to 100 meters using a single CAT cable. Moreover, the IP350UHD-TX and IP350UHD-RX are capable of supporting both 4K UHD 60Hz 4:4:4 video and Dante audio distribution on a single network, with the option for separating the Dante audio network interface from the video over IP network. These devices can be powered via PoE or locally and seamlessly integrate with leading automation brands through the Blustream ACM210 control module.

Blustream also caters to various matrix needs, from the Contractor series to the Platinum 8×8 HDBaseT AV Matrix. A new addition to their lineup is the HMX88-18G 8×8 HDBaseT matrix switcher, offering uncompromised 4K UHD resolution at 60Hz with 4:4:4 clarity and 4K to 1080p downscaling. With eight HDMI inputs, eight HDBaseT outputs, two HDMI loop outs, and support for IR, serial, and Ethernet with audio return channel (ARC), this matrix switcher provides extensive control options via web GUI, RS-232, IP, and IR. It incorporates HDBaseT 3.0 technology for full support on every output, ensuring high-quality extension and management of HDMI 2.0 AV sources. The matrix also features full Dolby Vision support and pixel-perfect replication of each input on displays. Additionally, it offers Ethernet LAN distribution for smart TVs and audio return channel (ARC) support for distributing audio throughout the home. The matrix switcher’s advanced control capabilities, including direct serial control via guest mode, make it a compatible choice with various control platforms, including native control in RTI systems.

Blustream will also unveil the FVE4K-KIT, a 4K HDMI over Fiber Extender Kit with SDVoE technology, enabling uncompressed video transmission up to 4K UHD 60Hz 4:2:0 with minimal compression at up to 18Gbps HDMI. The kit features 10Gb+ SFP+ connectivity for versatile fiber interface options, 1Gbps LAN support, as well as IR and RS-232 pass-through.

In the audio realm, Blustream offers a range of solutions, including Dolby and DTS downmixing options, eARC solutions, digital audio over CAT, and the PAC500AU, which supports analog audio over CAT. These solutions extend signals over impressive distances of up to 1640 feet using a single CAT cable. Additionally, Blustream offers an array of Dante networked audio solutions, featuring the NPA100DA networked power amplifier, DA44AU 4×4 digital audio converter, and a line of encoders and decoders.

For those unfamiliar with Blustream, Mr. Fitzgerald will host a training session on Friday, Sept. 8 at 11 a.m., providing insights into how Blustream delivers solutions that maximize integrator opportunities across the five pillars of AV distribution: extension, splitting, switching, matrixing, and converting. The goal is to demonstrate how Blustream’s portfolio addresses each of these aspects to enable integrators to excel in their installations. Registration for the training session can be done through the CEDIA Expo website.

For more information www.blustream-us.com

The post Blustream to Showcase New AV Distribution Solutions at CEDIA Expo 2023 appeared first on Smart Home World Magazine.

Leading AV distribution innovator Blustream announced the worldwide launch of the new IP300 video over IP platform. The IP300UHD and the Dante-enabled IP350UHD transmitters and receivers transmit 4K 60Hz 4:4:4 HDMI 2.0 with HDR at 18Gbps over a 1Gb network. This full HDMI 2.0 over IP is ideal for applications such as live sports where the highest quality is essential. The transmitters and receivers leverage the new ACM210 control module to facilitate seamless control with all leading automation brands.

“With the IP300UHD and IP350UHD, integrators now have a cost-effective solution to deliver 4K60 4:4:4 over a 1Gbps network,” said Martyn Shirley, General Manager and Founder at Blustream. “The IP300UHD and IP350UHD complete the Blustream video over IP offering, giving integrators the full spectrum of options – from the essential HD performance of the IP50HD line all the way to the uncompromised 18Gbps over a 10Gb network of the IP500UHD transceiver.”

Shipping now, the Blustream IP300 series video over IP platform allows virtually latency-free (1 frame) distribution of HDMI 2.0 video over a 1Gb managed network. The IP300UHD-TX is a 4K HDCP 2.2 HDMI transmitter that uses visually lossless compression technology to deliver 18Gbps HDMI, audio, bi-directional IR, RS-232, and USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the built-in fiber SFP network interface. The IP300UHD-RX receiver features a second RJ45 LAN port for daisy-chaining the HDMI signal onto further IP300UHD-RX units. With a full 18Gbps HDMI scaling chipset on board, the HDMI output can be adjusted to lower resolutions where legacy displays are required in the same system as full 4K. The scaling capabilities of the receiver also allow for video wall deployment.

Shipping in June, the Dante-enabled IP350UHD-TX and IP350UHD-RX can support both 4K60 4:4:4 video and Dante audio distribution on a single network. A second RJ45 connection allows for the Dante audio network interface to be segregated from the video over IP network whenever required.

All units can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the flexibility of the Blustream Multicast video over IP solution makes this platform ideal for multiple installation types. The new Advanced Control Module, the ACM210, was specifically designed to deliver faster processing power while retaining backward compatibility with the existing Blustream IP50 and IP200 series.

More information about the Blustream IP300UHD and IP350UHD transmitters and receivers can be found at:
United States: blustream-us.com/video-over-ip-hardware
Australia: blustream.com.au/video-over-ip-extenders
UK / EMEA: blustream.co.uk/video-over-ip-extenders

The post Blustream Now Shipping New 4K Video Over IP Line appeared first on Smart Home World Magazine.